A9K-MOD80-SE Specification
A9K-MOD80-SE Specifications |
|
Type |
ASR 9000 Mod80 Modular Line Card, Service Edge Optimized, requires modular port adapters |
Physical Dimensions |
14.5 W x 1.72 H x 22.40 L 14.5 W x 1.72 H x 24.25 L (including ejector levers) |
Weight |
17.5 lbs. (est.) (7.93 Kg) |
Chassis compatibility |
Compatible with the Cisco ASR 9922, 9010, 9006 and 9001 systems |
Port density |
Up to 2 modular port adapters are supported per line card. |
Ethernet |
? IEEE 802.3 compliant ? 10 Gigabit Ethernet PHY monitoring ? IEEE 802.x flow control ? Full-duplex operation ? Per-port byte and packet counters for policy drops; oversubscription drops; cyclic redundancy check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets |
Card density |
Maximum number of line cards per system: Cisco ASR 9922 = 20, Cisco ASR 9010 = 8, and Cisco ASR 9006 = 4 |
Options |
Each line card is available as either a Service Edge Optimized (enhanced QoS) or Packet Transport Optimized (basic QoS) line card. |
Reliability and availability |
Line card online insertion and removal (OIR) support without system impact |
Network Equipment Building Standards (NEBS) |
Cisco ASR 9000 Series Routers are designed to meet: ? SR-3580: NEBS Criteria Levels (Level 3) ? GR-1089-CORE: NEBS EMC and Safety ? GR-63-CORE: NEBS Physical Protection |
Operating temperature (nominal) |
41 to 104 ?F (5 to 40 ?C) |
Operating temperature (short-term) |
23 to 131 ?F ( ??5 to 55 ?C) |
Operating humidity (nominal) relative humidity |
10 to 85% |
Storage temperature |
??40 to 158 ?F ( ??40 to 70 ?C) |
Storage relative humidity |
5 to 95% Note: Not to exceed 0.024 kg of water per kg of dry air |
Operating altitude |
??60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements) |
ETSI standards |
Cisco ASR 9000 Series Routers are designed to meet: ? EN300 386: Telecommunications Network Equipment (EMC) ? ETSI 300 019 Storage Class 1.1 ? ETSI 300 019 Transportation Class 2.3 ? ETSI 300 019 Stationary Use Class 3.1 ? EN55022: Information Technology Equipment (Emissions) ? EN55024: Information Technology Equipment (Immunity) ? EN50082-1/EN-61000-6-1: Generic Immunity Standard |
EMC standards |
Cisco ASR 9000 Series Routers are designed to meet: ? FCC Class A ? ICES 003 Class A ? AS/NZS 3548 Class A ? CISPR 22 (EN55022) Class A ? VCCI Class A ? BSMI Class A ? IEC/EN 61000-3-2: Power Line Harmonics ? IEC/EN 61000-3-3: Voltage Fluctuations and Flicker |
Immunity |
Cisco ASR 9000 Series Routers are designed to meet: ? IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) ? IEC/EN-61000-4-3: Radiated Immunity (10V/m) ? IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) ? IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) ? IEC/EN-61000-4-5: Signal Ports (1kV) ? IEC/EN-61000-4-5: Surge DC Port (1kV) ? IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) ? IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) ? IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations |
Safety |
Cisco ASR 9000 Series Routers are designed to meet: ? UL/CSA/IEC/EN 60950-1 ? IEC/EN 60825 Laser Safety ? ACA TS001 ? AS/NZS 60950 ? FDA: Code of Federal Regulations Laser Safety |