| General |
| Device Type |
Switch – 48 ports – L3 – managed – stackable |
| Enclosure Type |
Desktop, rack-mountable 1U |
| Subtype |
10 Gigabit Ethernet |
| Ports |
48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ (uplink) |
| Performance |
Switching capacity: 1280 Gbps |
| Capacity |
IPv4 routes: 24000 ? NetFlow entries: 96000 ? Virtual interfaces (VLANs): 4000 ? Switched virtual interfaces (SVIs): 1000 |
| MAC Address Table Size |
32000 entries |
| Jumbo Frame Support |
9198 bytes |
| Routing Protocol |
OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, IGMPv2, IGMP, PIM-SM, PIM-DM, IGMPv3, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MLDv2, MLD |
| Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
| Authentication Method |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
| Features |
DHCP support, ARP support, Syslog support, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Virtual Route Forwarding-Lite (VRF-Lite), front to back airflow, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, radio resource management (RRM), ARP inspection, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP) |
| Compliant Standards |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| RAM |
8 GB |
| Flash Memory |
8 GB |
| Status Indicators |
Port transmission speed, port duplex mode, power, system, active, status |
| Expansion / Connectivity |
| Interfaces |
48 x 10GBase-X SFP+ ? 4 x 40Gbit LAN QSFP+ uplink ? 1 x USB Type A ? 1 x management (mini-USB) Type B ? 1 x console RJ-45 management ? 1 x management (Gigabit LAN) RJ-45 ? 2 x network stack device |
| Power |
| Power Device |
Internal power supply |
| Installed Qty |
1 (installed) / 2 (max) |
| Power Redundancy |
Optional |
| Power Redundancy Scheme |
1+1 (with optional power supply) |
| Power Provided |
750 Watt |
| Voltage Required |
AC 120/230 V (50 – 60 Hz) |
| Features |
Rear-to-front airflow |
| Miscellaneous |
| MTBF |
286,900 hours |
| Compliant Standards |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, CAN/CSA C22.2 No. 60950-1, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, EN 300386, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A |
| Software / System Requirements |
| Software Included |
Cisco IOS IP Base |
| Dimensions & Weight |
| Width |
17.5 in |
| Depth |
20.1 in |
| Height |
1.8 in |
| Weight |
16.42 lbs |
| Manufacturer Warranty |
| Service & Support |
Limited warranty – advance parts replacement – lifetime – response time: next business day ? Technical support – consulting – 90 days |
| Environmental Parameters |
| Min Operating Temperature |
23 ?F |
| Max Operating Temperature |
113 ?F |
| Humidity Range Operating |
10 – 95% (non-condensing) |
| Min Storage Temperature |
-40 ?F |
| Max Storage Temperature |
158 ?F |
DHL
FedEx
UPS
TNT
